Rosin Press

Home/Collections/Rosin Press
  • rosin press
      Pollen Press | 1.5 Ton Manual Rosin Press with LCD Display, Timer, Dual Heated Plates and 150C Max Temp (100W, 220V) This pollen press comes with 2cm thick, 5cm x 7.6cm wide solid aluminium heating plates, a temperature range of 0 - 150℃ (at 2°C accuracy), and a compressive force of 1500kg, so you can be sure to achieve solvent-less high quality rosin press yields. The Nectar Pollen Press is designed to give the user full plate control over the twist mechanism with a simple press to prevent any blowouts. Fit for both personal and commercial applications, the Nectar Pollen Press is transportable, weighing in at 6.5kg. Its 1.5 tons of pressure and dual heated 5cm x 7.6cm plate size are suitable for pressing all types of material. It is our recommended pollen press for users new to rosin pressing and a great rosin press to learn with.
  • diy rosin press
    Pollen Twist | 2.7MPa (2 Ton) Manual Heating Press with LCD Display, Timer, Dual Heated Plates and 250C Max Temp (500W, 220V) This diy rosin press machine has solid aluminium plates 2cm thick, 6cm x 12cm wide, a temperature range of 0~250℃ (at 2°C accuracy), and a compressive force of 2000kg, so you can be sure to press solvent-less high quality and healthy yields of rosin. Pollen Twist is designed to give the user full plate control over the twist mechanism with a simple twist to prevent any blowouts. Fit for both personal and commercial applications, the diy rosin press unit can be transported, weighing in at 10kg, the two tons of pressure and dual heated 6cm x 12cm plate size is suitable for pressing all types of material. It is our recommended press for users seeking a press that fits on a counter-top and those who do not want to hook up an air compressor.

Rosin Press

Nectar’s high-quality rosin press machines allow you to extract rosin by pressing herbs between two heated rosin press plates, meaning you can now enjoy sweet and pure rosin via solventless extraction. Nectar’s affordable DIY rosin press allows you to press rosin in the comfort of your own home with high yields of around 25%. 

Wondering how you can enjoy rosin? Well, look no further as the Nectar Gold and Nectar Platinum vaporizers each come with a concentration pad allowing you to vaporize your rosin without having to purchase specific wax-only devices.  

The quality of rosin you press is dependent on the machine and herbs you choose to press. If you get the combination correct, you’re on to creating the best rosin possibly produced. The Pollen Press, a manual rosin press machine satisfies the first half of that formula – so get ready!

With the advancement of technology, rosin has become one of the fastest-growing extract industries in the UK, having become the subject of much interest. 

Our rosin press machines offer the following features and benefits:

  • Dual heated plates
  • A rosin press kit including all accessories needed to get started
  • Strong force
  • Precise heating systems
  • Full plate control
  • Adjustable digital temperature control (2°C accuracy) 
  • Digital automatic timer
  • Even heat distribution
  • Pressure control
  • High rosin press yields
  • Suitable for pressing a variety of starting materials
  • Rosin press machines for both beginners as well as those more familiar with rosin pressing
  • Fit for both personal and commercial applications
  • Portable and transportable
  • Extensive operating manual including top tips for pressing the best rosin
  • 1 year warranty on rosin press and accessories
  • Same day dispatch except on holidays and weekends

Click through these links for more features and information about our pollen press machines:

Pollen Press  

Pollen Twist

What is rosin?

Rosin is a concentrate that has a sap-like consistency. It’s derived by using a rosin press to apply heat and pressure to the starting plant material. Its main attraction is that unlike other methods that use solvents such as butane and propane, rosin presses don’t use any chemicals during the extraction process. This results in a rosin concentrate that’s solventless and pure – yet potent.

The good news is that even the best rosin can be produced easily and quickly from the comfort of your own home. As the demand for rosin has increased, rosin press machines have become more diversified and suitable for home-use, yet still supplying the effectiveness of industrial machines.  Nectar’s rosin presses are powerful enough for both home and commercial use.

What is a rosin press?

A diy rosin press provides an efficient, effective and safe means of extracting rosin from starting materials. It’s a device or piece of equipment that combines extreme heat and pressure to force the dry herbs to liquify. This provides a very concentrated and potent concentrate.

A rosin press is also known as a pollen press machine, or a diy pollen press.

A manual rosin press is a versatile investment, as you can produce a variety of different products. The basic extract most think of when it comes to rosin is a translucent, sap-like concentrate.  However by varying the heat, pressure and time you can produce more dense extracts which have different hardness, shape, flavour and colour. A Nectar pollen press lends itself well to experimenting with extracts in this way.  

What is a suitable pressing force for pressing the best rosin?

The Nectar Pollen Press is capable of pressing around 1.5 tonnes. However, you should be looking at Platen PSI, and not just the force, hence you will need to take into consideration the size of the puck and/or platen sizes of your machine too. The larger the puck at the same pressing mass, the lower the Platen PSI, and hence we have specifically designed the Nectar Pre Press Mini Mould to ensure you get an optimal high yield press.

A general rule of thumb for pressing is between 300-1000 PSI. (More than this and you will increase the chances of blowouts and closing of oil channels, but less than this and it will result in lower yields).

The calculation for the Platen PSI is:

PSI = Pressing Force / Area of Applied Pressure

The diameter of the Nectar Pre Press Mini Mould is: 3cm or 1.1811 inches

So the area of applied pressure when using the Nectar Pre Press Mould is: Pi x r (squared) = 3.14 x 1.1811 x 1.1811 = 4.38 sq inches

The pressing mass is 1.5t = 3000lb.

Platen PSI = 3000 / 4.38 = 685 Platen PSI

What do you need to start producing rosin at home?

You will need the following in order to start extracting rosin:
  1. A diy rosin press machine
  2. Choice of starting material
  3. Rosin filter extraction bags*
  4. Parchment paper (unbleached, if possible)

*Rosin filter extraction bags should only be used when pressing more than 7g otherwise yields may be sacrificed.

I’m new to rosin extraction, which machine should I buy?

Our Nectar Pollen Press, with a plate size of 5cm x 7.6cm and temperatures up to 150°c, is suitable for those new to diy pollen presses and is an easier device to learn with, whilst still providing a pressure large enough for pressing up to 7g.

Our Nectar Pollen Twist, with a plate size of 6cm x 12cm and temperatures up to 250°c, is suitable for those who want a press that fits onto a counter-top and who do not want to hook up an air compressor.

Temperature

Controlling rosin temperature is key to using a manual rosin press machine effectively.  If you use lower temperatures (65°C-105°C or 150°F- 220°F) you will have lower rosin yields, but more flavour and a more stable, butter-like consistency. 

On the other hand, with higher temperatures (105°C-121°C or 220°F- 250°F) you’ll get greater rosin yields, but less flavour and a less stable, sap-like consistency.

How safe is a diy rosin press? 

The solventless extraction of a diy rosin press is one of the safest methods of extraction in the industry.  It is non-volatile extraction, meaning it does not use any strong chemicals such as butane, ethanol or CO2; which produces a natural and pure rosin concentrate.  It is this primary reason that rosin press usage is making waves in the extract market.

Solvent extraction methods on the other hand produce higher yields but involve a risk of injury and negative impacts on health due to requiring specialist machines that handle volatile chemicals. Moreover, to carry out solvent pressing, you have to comply with strict health and safety regulations so it’s a much larger operation.

All in all, solventless pressing using a small rosin press machine is a cleaner and safer process with minimal risks.

Due to the advantages of diy rosin presses and their home-usability, rosin is rapidly gaining popularity and becoming poised to become the forerunner in the extracts market.   

Are rosin and CBD the same? 

The short answer is that it depends on the material being pressed. If you’re pressing CBD only buds then the rosin produced will be a CBD concentrate. When pressing cannabis, the rosin produced will be a concentrated form of cannabis which will be made up of approximately 60-70% THC and other cannabinoids such as CBD.    

Moreover, when pressing a kitchen herb such as lavender, then rest assured a lavender essential oil rosin will be produced.

Rosin is a great way of consuming CBD without the worries of solvent extraction used in the extraction of CBD. Due to the potency of rosin extracts, and the preservation of terpenes, it’s an appealing option with smaller quantities going further. The rich cannabinoid and terpene content of rosin make it a popular choice among herbalists. Even the best rosin press machine will produce approximately 25% yield, meaning that for every 4g of material put into the machine, 1g of rosin will come out. This may not sound great but given the potency and high concentration of active elements within the rosin, much less product is needed for the same desired effects.

What material is used in the manufacturing of Nectar’s rosin press plates?

Our heat plates are manufactured from high quality aluminium for efficient heating and quick cooling.

What if my Nectar rosin press breaks?

All parts of our rosin presses are made with high quality materials, but just in case, we offer a 1-year warranty as standard. Here is our pollen press return and warranty policy: 

Nectar Pollen Press Return & Warranty Policy: No returns on any sales are permitted, all presses now come with a one year warranty, which begins upon product delivery. During that time we will supply parts free of charge, for anything that breaks. If the press is damaged beyond repair and requires a return, we will cover the cost of shipping and send out a new machine. 

I have a question about Nectar’s rosin press machines – how do I contact you? 

rosin pressWe are always on hand to help you with any of your questions. Please contact us by whichever method suits you best, and we’ll be happy to help:

Telephone: +44 (0)207 050 0737

WhatsApp: +44 (0)773 2415188

[email protected]

Go to Top